Mikuni VM series, round slide carburetors

From OpenContent Curriculum

(Difference between revisions)
Jump to: navigation, search
m (and in regard to the equipment...)
m
 
(One intermediate revision not shown)
Line 1: Line 1:
Mikuni round valve (slide) carburetors are a common form of fuel delivery used in the popular brands of two-cycle snowmachines. They use a system of jets, needles, and air control, which overlap in function, to provide a smooth delivery of fuel at all levels of engine function. These carburetors are quite simple and readily learned and can be easily maintained and repaired.
Mikuni round valve (slide) carburetors are a common form of fuel delivery used in the popular brands of two-cycle snowmachines. They use a system of jets, needles, and air control, which overlap in function, to provide a smooth delivery of fuel at all levels of engine function. These carburetors are quite simple and readily learned and can be easily maintained and repaired.
-
===this page - and related pages it links to- are under construction. Watch your step===
 
==Special '''Safety Precautions''' should be heeded when working with carburetors: ==
==Special '''Safety Precautions''' should be heeded when working with carburetors: ==
Line 12: Line 11:
• Mikuni Carburetors are constructed mainly of relatively soft, non-ferrous metals including zinc, aluminum, and brass. They are very functional and adequate for their intended purposes. However, one must use care, especially in working with the soft brass jets, to avoid stripping or breaking threaded parts.
• Mikuni Carburetors are constructed mainly of relatively soft, non-ferrous metals including zinc, aluminum, and brass. They are very functional and adequate for their intended purposes. However, one must use care, especially in working with the soft brass jets, to avoid stripping or breaking threaded parts.
 +
[[ Image:Mikuni internal parts a.jpg]]
 +
 +
The Mikuni round slide carburetors used on many snowmachines are rather simple in design, but with parts which can be rather confusing in their terminology. The picture above shows just about any part which is made to be removable and has a name. This picture is not intended to help you in any way other than to identify parts.
 +
 +
*Disclaimer: It should be understood that the example used in this pictorial is a salvaged carburetor. This carb was not removed from a running machine - nor would a machine likely have run with it installed. It does show some of the issues one might encounter, albeit to a greater degree than one would expect to find normally. This carburetor actually shows very little wear in spite of the crud both inside and out. It will easily function perfectly again.
[[Mukuni VM: Outside Parts and Functions]]
[[Mukuni VM: Outside Parts and Functions]]
Line 19: Line 23:
[[Mukuni VM: Inside Parts and Functions]]
[[Mukuni VM: Inside Parts and Functions]]
-
[[ Image:Mikuni internal parts a.jpg]]
 
-
 
-
The Mikuni round slide carburetors used on many snowmachines are rather simple in design, but with parts which can be rather confusing in their terminology. The picture above shows just about any part which is made to be removable and has a name. This picture is not intended to help you in any way other than to identify parts.
 
-
 
-
*Disclaimer: It should be understood that the example used in this pictorial is a salvaged carburetor. This carb was not removed from a running machine - nor would a machine likely have run with it installed. It does show some of the issues one might encounter, albeit to a greater degree than one would expect to find normally. This carburetor actually shows very little wear in spite of the crud both inside and out. It will easily function perfectly again.
 
Go back to [[Mikuni Carburetors]]
Go back to [[Mikuni Carburetors]]

Latest revision as of 17:23, 15 January 2009

Mikuni round valve (slide) carburetors are a common form of fuel delivery used in the popular brands of two-cycle snowmachines. They use a system of jets, needles, and air control, which overlap in function, to provide a smooth delivery of fuel at all levels of engine function. These carburetors are quite simple and readily learned and can be easily maintained and repaired.


Special Safety Precautions should be heeded when working with carburetors:

and in regard to the equipment...

• Mikuni Carburetors are constructed mainly of relatively soft, non-ferrous metals including zinc, aluminum, and brass. They are very functional and adequate for their intended purposes. However, one must use care, especially in working with the soft brass jets, to avoid stripping or breaking threaded parts.

Mikuni internal parts a.jpg

The Mikuni round slide carburetors used on many snowmachines are rather simple in design, but with parts which can be rather confusing in their terminology. The picture above shows just about any part which is made to be removable and has a name. This picture is not intended to help you in any way other than to identify parts.

Mukuni VM: Outside Parts and Functions


Mukuni VM: Inside Parts and Functions

Go back to Mikuni Carburetors

Personal tools
Namespaces
Variants
Actions
Wiki Navigation
BSSD Websites
About BSSD
BSSD Projects
Toolbox